Disponibilidad: 1 En Stock
COMBO REDS 721 SCUDERIA GEN2 PRO + X-ONE 2143
Hay 32 productos.
Filtros activos
Disponibilidad: 1 En Stock
COMBO REDS 721 SCUDERIA GEN2 PRO + X-ONE 2143
Disponibilidad: 1 En Stock
Introducing the Reds Racing 721 Scuderia PRO Gen 4, a cutting-edge 3.5cc off-road engine designed to elevate your racing experience.
This exceptional engine boasts Reds Racing's revolutionary 3 needle carburetor, only available on Gen 4 Scuderia engine. This carburetor not only facilitates superior tuning in diverse conditions but also ensures a more consistent and linear power delivery. Each carburetor is equipped with a special sealing ring, enhancing both sealing and tuning stability.
Disponibilidad: Sin stock
Servo dimensions Standard
Servo type Digital
Thrust at 6.0V [kg/cm] 31
Thrust at 7.4V [kg/cm] 37
Speed at 6.0V [s/60st.] 0.14
Speed at 7.4V [s/60st.] 0.11
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 5 - 8.4
Length [mm] 41
Width [mm] 21
Height [mm] 38
Weight [g] 74
Intended for Aeroplanes,Helicopters,On-road cars,Off-road cars,Sailing boats,Boats
S.BUS Yes
S.BUS2 Yes
SR mode No
Water resistance Splash-resistant
Disponibilidad: 1 En Stock
The REDS 521 Sport .21 Off-Road Competition Buggy Engine offers a balance of innovation, quality and performance at a mid range street price. The 521 Sport features technical changes in the 5 port sleeve, combined with updated materials to offer users high reliability, tuning stability and fuel mileage. The 521 Sport guarantees excellent performance at a reasonable price.
Disponibilidad: Sin stock
Futaba HPS-CT702 (30kg 0.07s/60°)
Servo dimensions Standard
Servo type Digital
Thrust at 6.0V [kg∙cm] 23
Thrust at 7.4V [kg∙cm] 30
Speed at 6.0V [s/60st.] 0.08
Speed at 7.4V [s/60st.] 0.07
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40.5
Width [mm] 21
Height [mm] 26.2
Weight [g] 53
Intended for On-road cars,Off-road cars
S.BUS Yes
S.BUS2 Yes
SR mode Yes
Water resistance Splash-resistant
Disponibilidad: 3 En Stock
Ideal for 1/8 on road and 1/5 off road scale applications
Superior Holding Torque
Incredible efficiency and low power consumption
Standard dimension make it perfect for vehicles that can benefit from a high quality servo
CNC Machined aluminum case for exceptional cooling
Programmable High torque Brushless servo
SSR mode compatible
25T output shaft
2 μsec Dead Band
1-Year Limited Warranty
Disponibilidad: 4 En Stock
Ideal for 1/8 on road and 1/5 off road scale applications
Superior Holding Torque
Incredible efficiency and low power consumption
Standard dimension make it perfect for vehicles that can benefit from a high quality servo
CNC Machined aluminum case for exceptional cooling
Programmable High torque Brushless servo
SSR mode compatible
25T output shaft
2 μsec Dead Band
1-Year Limited Warranty
- FUERA DE STOCK, CONSULTAR DISPONIBILIDAD
Disponibilidad: Sin stock
operating speed (6.0v): 0.07 sec/60 degrees at no load
operating speed (7.4v): 0.06 sec/60 degrees at no load
stall torque (6.0v): 9.0kg.cm (125.0 oz/in)
stall torque (7.4v): 12.0kg.cm (166.6 oz/in)
Disponibilidad: 1 En Stock
operating speed (6.0v): 0.08 sec/60 degrees at no load
operating speed (7.4v): 0.065 sec/60 degrees at no load
operating speed (8.4v): 0.053 sec/60 degrees at no load
stall torque (6.0v): 25.0kg.cm (347.2 oz/in)
stall torque (7.4v): 30.0kg.cm (416.6 oz/in)
stall torque (8.4v): 35.0kg.cm (486.1 oz/in)
Disponibilidad: Sin stock
4PM R334SBS F2.4GHZ
Modulation/coding T-FHSS SR Surface-2.4GHz,T-FHSS Surface-2.4GHz
Channels 4
Function Fail-safe,Telemetry
Power supply (jmenovité napětí) 4.8V,6V,7.2V,7.4V,3.7V,6.6V
Length [mm] 33.9
Width [mm] 22.3
Height [mm] 11.3
Weight [g] 7.5
Serial output S-BUS2
Disponibilidad: 2 En Stock
Type: Digital
Bearing: Dual
Motor Type: Brushless
Gear Type: Metal
Gear Material: Steel
control system: pulse width control
working frequence: 1520μs / 330hz
operating voltage: dc6.0-8.4v
operating temperature range: -10 to + 60 degree
operating speed (6.0v): 0.15 sec/60 degrees at no load
operating speed (7.4v): 0.11 sec/60 degrees at no load
operating speed (8.4v): 0.10 sec/60 degrees at no load
stall torque (6.0v): 55.0kg.cm (763.8 oz/in)
stall torque (7.4v): 65.0kg.cm (902.7 oz/in)
stall torque (8.4v): 75.0kg.cm (1041.6 oz/in)
potentiometer drive: direct drive
dimensions: 40.0 x 20.0 x 39.2 mm /1.57 x 0.79 x 1.54 in
weight: 82.0g (2.89 oz)
connector wire length: jr 300 mm
Disponibilidad: Sin stock
FUTABA 10PX R404SBS-E + BATERÍA + CARGADOR
Disponibilidad: 2 En Stock
Type: Digital
Bearing: Dual
Motor Type: Brushless
Gear Type: Metal
Gear Material: Steel
control system: pulse width control
working frequence: 1520μs / 330hz
operating voltage: dc6.0-8.4v
operating temperature range: -10 to + 60 degree
operating speed (6.0v): 0.11 sec/60 degrees at no load
operating speed (7.4v): 0.078 sec/60 degrees at no load
operating speed (8.4v): 0.07 sec/60 degrees at no load
stall torque (6.0v): 50.0kg.cm (694.4 oz/in)
stall torque (7.4v): 55.0kg.cm (763.8 oz/in)
stall torque (8.4v): 60.0kg.cm (833.2 oz/in)
potentiometer drive: direct drive
dimensions: 40.0 x 20.0 x 39.2 mm /1.57 x 0.79 x 1.54 in
weight: 82.0g (2.89 oz)
connector wire length: jr 300 mm
Disponibilidad: 1 En Stock
INFORMACIÓN DEL PRODUCTO:
KEY FEATURES
- Ideal for 1/10 on road and 1/8 off road scale applications, as well as large scale airplanes and jets
- incredible efficiency and low power consumption
- 2 μsec Dead Band
Application :
1/10 On-road, 1/10 Off-road, 1/8 On-road, 1/8 Off-road & 600 700/ Helicopter
Disponibilidad: 1 En Stock
INFORMACIÓN DEL PRODUCTO:
KEY FEATURES
- Ideal for 1/10 on road applications
- incredible efficiency and low power consumption
- Aluminium case for good heat dissipation
- NMB dual main bearings
- 25T output shaft
Application :
1/10 On-road, 1/10 Off-road, 1/8 On-road, 1/8 Off-road
- FUERA DE STOCK, CONSULTAR DISPONIBILIDAD
Disponibilidad: 2 En Stock
INFORMACIÓN DEL PRODUCTO:
KEY FEATURES
- Ideal for 1/8 on road and 1/8 off road scale applications
- Superior Holding Torque
- incredible efficiency and low power consumption
- Standard dimension make it perfect for vehicles that can benefit from a high quality servo
- CNC Machined aluminium case for exceptional cooling
- NMB dual main bearings
- 25T output shaft
- HD 4096 Resolution
- 2 μsec Dead Band
Disponibilidad: 1 En Stock
Power Supply: 6.0V~7.4V
Speed (6.0V) : 0.12 sec/60°, (7.4V) : 0.09 sec/60°
Stall Torque (6.0V) : 31.4kg-cm, (7.4V): 40.2kg-cm
Disponibilidad: 1 En Stock
El soporte de mantenimiento de Fastrax tiene una serie de características interesantes que lo distinguen de la multitud. El estante superior giratorio se puede bloquear en su posición, lo que le permite realizar tareas sin que se mueva la placa acolchada de espuma.
Un lado cuenta con un soporte de construcción de choque para choques con un tamaño de eje de hasta 4.5 mm El otro lado tiene una banda magnética a la que puede colocar tornillos y herramientas para que no se caigan de la mesa.
Disponibilidad: 3 En Stock
INFORMACIÓN DEL PRODUCTO:
PRODUCT SPECIFICATIONS
Type: Digital
Bearing: Dual
Motor Type: DC
Gear Type: Metal
Gear Material: Copper & Alu
control system: pulse width control
working frequence: 1520μs / 330hz
operating voltage: dc4.8-7.4v
operating temperature range: -10 to + 60 degree
operating speed (4.8v): 0.16 sec/60 degrees at no load
operating speed (6.0v): 0.12 sec/60 degrees at no load
operating speed (7.4v): 0.10 sec/60 degrees at no load
stall torque (4.8v): 1.9kg.cm (26.4 oz/in)
stall torque (6.0v): 2.5kg.cm (34.7 oz/in)
stall torque (7.4v): 2.8kg.cm (38.9 oz/in)
potentiometer drive: direct drive
dimensions: 22.5x12.5x24.0 mm /0.89x0.49x0.94 in
weight: 16.0g (0.56 oz)
connector wire length: jr 300 mm
Disponibilidad: 1 En Stock
El soporte de mantenimiento de Fastrax tiene una serie de características interesantes que lo distinguen de la multitud. El estante superior giratorio se puede bloquear en su posición, lo que le permite realizar tareas sin que se mueva la placa acolchada de espuma.
Un lado cuenta con un soporte de construcción de choque para choques con un tamaño de eje de hasta 4.5 mm El otro lado tiene una banda magnética a la que puede colocar tornillos y herramientas para que no se caigan de la mesa.
- FUERA DE STOCK, CONSULTAR DISPONIBILIDAD
Disponibilidad: Sin stock
El soporte de mantenimiento de Fastrax tiene una serie de características interesantes que lo distinguen de la multitud. El estante superior giratorio se puede bloquear en su posición, lo que le permite realizar tareas sin que se mueva la placa acolchada de espuma.
Un lado cuenta con un soporte de construcción de choque para choques con un tamaño de eje de hasta 4.5 mm El otro lado tiene una banda magnética a la que puede colocar tornillos y herramientas para que no se caigan de la mesa.