Hay 47 productos.
Filtros activos
Este cargador/descargador profesional de CA se destaca por su diseño angular y tamaño compacto al empaquetar una gran potencia de 65 vatios en una carcasa tan pequeña. Compatible con una gama completa de los tipos de baterías más populares, incluida la nueva generación LiHV, el S65 mantiene sus baterías cargadas con 6 amperios de potencia de carga.
Descripción
Type: Digital
Bearing: Dual
Motor Type: Brushless
Gear Type: Metal
Gear Material: Steel
control system: pulse width control
working frequence: 1520μs / 330hz
operating voltage: dc6.0-8.4v
operating temperature range: -10 to + 60 degree
operating speed (6.0v): 0.15 sec/60 degrees at no load
operating speed (7.4v): 0.11 sec/60 degrees at no load
operating speed (8.4v): 0.10 sec/60 degrees at no load
stall torque (6.0v): 55.0kg.cm (763.8 oz/in)
stall torque (7.4v): 65.0kg.cm (902.7 oz/in)
stall torque (8.4v): 75.0kg.cm (1041.6 oz/in)
potentiometer drive: direct drive
dimensions: 40.0 x 20.0 x 39.2 mm /1.57 x 0.79 x 1.54 in
weight: 82.0g (2.89 oz)
connector wire length: jr 300 mm
Descripción
Type: Digital
Bearing: Dual
Motor Type: Brushless
Gear Type: Metal
Gear Material: Steel
control system: pulse width control
working frequence: 1520μs / 330hz
operating voltage: dc6.0-8.4v
operating temperature range: -10 to + 60 degree
operating speed (6.0v): 0.11 sec/60 degrees at no load
operating speed (7.4v): 0.078 sec/60 degrees at no load
operating speed (8.4v): 0.07 sec/60 degrees at no load
stall torque (6.0v): 50.0kg.cm (694.4 oz/in)
stall torque (7.4v): 55.0kg.cm (763.8 oz/in)
stall torque (8.4v): 60.0kg.cm (833.2 oz/in)
potentiometer drive: direct drive
dimensions: 40.0 x 20.0 x 39.2 mm /1.57 x 0.79 x 1.54 in
weight: 82.0g (2.89 oz)
connector wire length: jr 300 mm
LB Nation
LIBERTY WALK
Diecast Figuras escala 164
AMERICAN DIORAMA
CARGADOR D750 LIPO 1-8S 32A 500W AC SKYRC
CARPA DE METAL
CANOPLY RWB
AMERICAN DIORAMA
HERRAMIENTAS DE TALLER DE METAL
SET C
AMERICAN DIORAMA
ESCALA 1:64
FIGURAS DE METAL TEAM LIBERTY WALK
AMERICAN DIORAMA
MIJO EXCLUSIVES
EDICION LIMITADA
ESCALA 1:64
CARPA DE METAL 2 UNIDADES
CANOPLY LBWK LIBERTY WALK
AMERICAN DIORAMA
DIORAMA NISMO 1:64 CIRCUITO DE CARRERAS
AMERICAN DIORAMA
DIORAMA NISMO 1:64 CIRCUITO DE CARRERAS
AMERICAN DIORAMA
DIORAMA NISMO 1:64 CIRCUITO DE CARRERAS
AMERICAN DIORAMA
FIGURAS 1:64 AMERICAN DIORAMA TOP TUNERS
HERRAMIENTAS DE TALLER DE METAL AMERICAN DIORAMA ESCALA 1:64
METAL TOOLS
HERRAMIENTAS DE TALLER DE METAL AMERICAN DIORAMA ESCALA 1:64
METAL TOOLS
Ideal for 1/8 on road and 1/5 off road scale applications
Superior Holding Torque
Incredible efficiency and low power consumption
Standard dimension make it perfect for vehicles that can benefit from a high quality servo
CNC Machined aluminum case for exceptional cooling
Programmable High torque Brushless servo
SSR mode compatible
25T output shaft
2 μsec Dead Band
1-Year Limited Warranty
Ideal for 1/8 on road and 1/5 off road scale applications
Superior Holding Torque
Incredible efficiency and low power consumption
Standard dimension make it perfect for vehicles that can benefit from a high quality servo
CNC Machined aluminum case for exceptional cooling
Programmable High torque Brushless servo
SSR mode compatible
25T output shaft
2 μsec Dead Band
1-Year Limited Warranty
SkyRC D260 is a dual channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at maximum 14A per channel, D260 is a smart choice for RC hobbyists.
SkyRC T1000 Maestro Charger
Arm® Cortex®-M4 and HyperBoost Power Couple
Supercharged by ARM Cortex®-M4
Push your next RC racing trip beyond the edge with SkyRC T1000! The Arm Cortex-M4 chip takes our most versatile, dual output T1000 into another dimension with a built-in DSP instruction. The chip core features a Floating Point Unit (FPU) that accelerates single precision floating point math operations and supports all ARM single precision instructions and data types.
Multiplied by Proprietary HyperBoost
Thanks to the 200 MHz ARM Micro controller, the deployed Oversampling Technology can improve ADC Resolution to 16bit. The efficient PID mechanism can fine-tune the current to increase response speed and the charge current accuracy.
Supercharged by Arm® Cortex®-M4
Push your next RC racing trip beyond the edge with SkyRC D200neo! The Arm Cortex®-M41 chip takes our most versatile, dual output D200neo into another dimension with a built-in DSP instruction. The chip core features a Floating Point Unit (FPU) that accelerates single precision floating point math operations and supports all ARM® single precision instructions and data types.
This is an enhanced version of the earlier e660 multicharger, the SkyRC e680 is suitable for all current battery types: LiPo, Li-ion, LiFe, NiCd, NiMH, PB and also new generation LiHV with end voltage 4.35V per cell, with the maximum 80W charge power and 8A charge current. Especially it supports DJI Mavic Battery with maximum 4A charge power.
The e680 is capable of operating as a power supply with a maximum output of 80 watts so that it helps the hobbyists to power the DC equipment.
Multi-purpose for Most Chemistries With Generic XT60
SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports. It is not only compact in size but also powerful in output with maximum 100W charging power and 5A charging current which makes charging more sufficient. With the new AGM and cold charge modes, the user is free to charge their PB and AGM batteries in cold days.
SkyRC T100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically initiate the charging of 2 batteries at once to their maximum capacity. To top it all, the batteries being charged do not even need to have the same configuration.
operating speed (6.0v): 0.07 sec/60 degrees at no load
operating speed (7.4v): 0.06 sec/60 degrees at no load
stall torque (6.0v): 9.0kg.cm (125.0 oz/in)
stall torque (7.4v): 12.0kg.cm (166.6 oz/in)
operating speed (6.0v): 0.08 sec/60 degrees at no load
operating speed (7.4v): 0.065 sec/60 degrees at no load
operating speed (8.4v): 0.053 sec/60 degrees at no load
stall torque (6.0v): 25.0kg.cm (347.2 oz/in)
stall torque (7.4v): 30.0kg.cm (416.6 oz/in)
stall torque (8.4v): 35.0kg.cm (486.1 oz/in)
